Newton Iowa Drift Event Driver Tech Inspection Sheet Driver Name: ________________________ Car Make/Model: _____________________ Car Number: ________ Date: ________ Tech Inspector: ______________________ Driver Requirements

☐ Driver is 18+ with valid driver license (or guardian present) ☐ Driver has event wristband

☐ DOT approved helmet worn and fastened

☐ Long pants, closed toe shoes, sleeved shirt

☐ Attended driver meeting

☐ Driver understands respect & safety rules Vehicle Inspection General Safety

☐ Vehicle appears mechanically sound

☐ No loose items inside car

☐ Fire extinguisher installed & charged

☐ Fire extinguisher securely mounted & accessible

☐ Seats securely mounted

☐ Harness or seatbelt properly installed

☐ Pit speed limiter acknowledged (10 mph) Engine / Drivetrain

☐ No fluid leaks

☐ Cooling system uses water only (no coolant)

☐ Overflow tank installed

☐ Gas cap secure

☐ Fluid hoses in good condition

☐ Exhaust exits outside vehicle body ☐ Fluid reservoirs sealed properly Electrical / Battery

☐ Battery securely mounted

☐ Battery terminals covered

☐ Brake lights working (2 minimum)

☐ Kill switch or OE ignition functioning

☐ Wiring protected and insulated Suspension / Wheels

☐ Ball joints & bushings good condition

☐ Wheel bearings tight

☐ Steering smooth with no binding

☐ Lug nuts present and torqued Body / Glass

☐ Hood securely latched or pinned

☐ Trunk securely latched

☐ Windshield Roll Cage / Safety (If Equipped)

☐ Roll cage / roll bar secure

☐ Harness mounting correct

☐ For convertibles: roll bar installed Staff Approval: ______________________ Tech Result ☐ PASS ☐ FAIL Notes: Inspector Signature: ______________________